{"title":"Handwerks","description":null,"products":[{"product_id":"advanced-joiners-mallet-kit","title":"Advanced Joiner's Mallet Kit","description":"\u003cp style=\"white-space: pre-wrap;\" data-rte-preserve-empty=\"true\"\u003eFor striking wood-handled chisels, a wooden mallet is best. When wood hits wood, the surfaces contract and expand, transferring force with a springy action that’s easy on the arm and wrist. You can buy a wooden mallet, but these are mostly cheap and clumsy, so woodworkers make their own.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"white-space: pre-wrap;\" data-rte-preserve-empty=\"true\"\u003ePre-industrial mallets were made by mortising a big chunk of hardwood, but this has gotten tough. Lumberyards don’t carry thick enough stock and chopping that deep mortise is a challenge. Many woodworkers resort to a laminated design, where the head is made from four pieces of stock glued up around the handle. These laminated mallets look amateurish, and they often fall apart. Even modern glues can’t always stand up to the constant pounding of bench work, and laminated mallets can fail in the middle of a project.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"white-space: pre-wrap;\" data-rte-preserve-empty=\"true\"\u003eCompass Rose has solved this problem with our new Advanced Joiner’s Mallet Kit. Based on a century-old mallet, our kit delivers outstanding ergonomics and solid timber. We’ve redesigned the mallet head with a two-piece, finger-jointed construction. Unlike other laminated mallets, ours has a single joint that fits tightly, even before gluing. Our joint has over 40% more glue surface than a standard lamination and is much more resistant to striking force.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"white-space: pre-wrap;\" data-rte-preserve-empty=\"true\"\u003eThe two-piece design eliminates the need for chopping a deep mortise. Instead, the tapered opening for the handle is built right in. When the mallet is assembled, you lock the head in place by driving a wood wedge into the handle. We’ve included a nice chunk of hardwood for making the wedge.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"white-space: pre-wrap;\" data-rte-preserve-empty=\"true\"\u003eWe made this mallet a kit because \u003cem\u003eyou\u003c\/em\u003e should make your mallet. We’ve handled some of the challenges, but you still need to shape, assemble, personalize, and finish your mallet. It’s a real project that takes a few hours to complete. After your mallet is done, you’ll have a solid wood mallet ready for years of use in the shop.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"white-space: pre-wrap;\" data-rte-preserve-empty=\"true\"\u003eTo help with your mallet build, we’ve made a complete video and a \u003ca href=\"\/s\/mallet-guide.pdf\" target=\"_blank\"\u003eFREE PDF guide\u003c\/a\u003e that covers all the steps.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"white-space: pre-wrap;\" data-rte-preserve-empty=\"true\"\u003eThe kit includes a two-piece head made from red oak, a handle blank made from white oak, and a piece of dark hardwood (mostly walnut) for making the contrasting wedge. All you need is glue, finish, and basic hand tools to do the shaping.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"white-space: pre-wrap;\" data-rte-preserve-empty=\"true\"\u003e\u003cem\u003e\u003cu\u003ePlease note\u003c\/u\u003e: Wood mallets are made for tapping wooden chisel handles, wood-bodied planes, and joint assembly. Do not strike non-wood materials with your mallet. Use a hammer for heavy striking tasks. The face of your mallet will show denting and wear over time. Because your mallet is made from solid timbers, you should expect variations in grain, natural mineral stains, and very small knots. These are all normal.\u003c\/em\u003e\u003c\/p\u003e","brand":"Compass Rose Tools","offers":[{"title":"Default Title","offer_id":46993906794717,"sku":"CRDT-110-100","price":58.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0754\/4147\/1709\/files\/20250423_143113.webp?v=1762997601"},{"product_id":"dovetail-square","title":"Dovetail Square","description":"\u003cp style=\"white-space: pre-wrap;\" data-rte-preserve-empty=\"true\"\u003eLaying out dovetails requires a good dovetail gauge \u003cem\u003eand\u003c\/em\u003e an accurate square. Most woodworking squares aren’t designed for dovetailing, and many woodworkers buy a cheap layout gauge that’s lightweight and uncomfortable.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"white-space: pre-wrap;\" data-rte-preserve-empty=\"true\"\u003eThe Compass Rose Dovetail Square solves these problems by combining a precision try-square with a dual-angle dovetail gauge in a single tool. It allows the artisan to lay out dovetail angles at the most common pitches, carry lines down the faces or edges of boards, and test components for squareness. It’s an all-in-one tool for all your dovetailing needs.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"white-space: pre-wrap;\" data-rte-preserve-empty=\"true\"\u003eMany dovetail gauges only offer a single pitch, but the Compass Rose Dovetail Square has both 1:5 (softwoods) and 1:8 (hardwoods). Just lay out your dovetail spacing and then register the square on the end of your board to draw in all the angles in one direction. When you get to the edge of the board, flip the square and mark your lines in the opposite direction. (Check out \u003ca href=\"https:\/\/www.youtube.com\/watch?v=DuAK0-6-ZnQ\" target=\"_blank\"\u003ethis video\u003c\/a\u003e for a demonstration.) We’ve built in an extra registration point at the top of the square, so you always have solid contact with the work, even when laying out the tiniest tails and pins.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"white-space: pre-wrap;\" data-rte-preserve-empty=\"true\"\u003eOur square is made to be wide and short, so it balances on the edges and ends of boards, and it won’t hit your bench or vise during layout. It’s rigid but light, so it’s easy to hold in place while you work.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"white-space: pre-wrap;\" data-rte-preserve-empty=\"true\"\u003eThis tool is also an excellent small try square, accurate to within 0.001”. You can use it to strike lines across the edges of boards, test small components, and even check the quality of your joints. The Dovetail Square is small enough to reach right inside your dovetails and find that little high spot that keeps a joint from coming together.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"white-space: pre-wrap;\" data-rte-preserve-empty=\"true\"\u003eWe spent over a year developing this tool, and we packed it with features. Our square has a comfortable ogee grip, a hang-hole for storage, and the angles are laser-engraved on \u003cem\u003eboth\u003c\/em\u003e sides for convenience. It’s CNC machined from a solid block of 6061 T6 aluminum. The tool is tumbled to remove sharp edges and anodized to prevent corrosion. And it comes packed in a custom-cut foam holder, which can also be used as storage.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"white-space: pre-wrap;\" data-rte-preserve-empty=\"true\"\u003eThe Compass Rose Dovetail Square is a single tool that can replace several cheaper solutions. Buy ours and you can get on with cutting your joints.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"white-space: pre-wrap;\" data-rte-preserve-empty=\"true\"\u003eMade in USA.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"white-space: pre-wrap;\" data-rte-preserve-empty=\"true\"\u003ePatented.\u003c\/p\u003e","brand":"Compass Rose Tools","offers":[{"title":"Default Title","offer_id":46993906893021,"sku":"CRDT-101-100","price":67.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0754\/4147\/1709\/files\/20241203_142658-2_ff789ac6-13c4-41b9-9459-e64c084b6a70.webp?v=1762997619"},{"product_id":"no-mod-planing-stop","title":"No-Mod Planing Stop","description":"\u003cp class=\"\" style=\"white-space:pre-wrap;\"\u003eTransform your hand-tool woodworking with the quick and efficient Compass Rose “No-Mod” Planing Stop. This innovative design seamlessly integrates with your woodworking vise, offering a hassle-free planing stop without any modifications to your workbench. Installation is a breeze - simply place it in your vise and tighten, taking less than 5 seconds (yes, we've timed it!). Removal is equally swift.\u003c\/p\u003e\u003cp class=\"\" style=\"white-space:pre-wrap;\"\u003eWhen not in use, the No-Mod Planing Stop conveniently hangs on a peg or screw via its included hang-hole. Perfect for storage on your bench leg or tool-wall, or even in your tool chest for on-the-go accessibility.\u003c\/p\u003e\u003cp class=\"\" style=\"white-space:pre-wrap;\"\u003eSafety and versatility are key. Our exclusive “safe-stop” cover slides over the teeth, safeguarding your hands and tools. This durable cover also allows for direct planing without leaving tooth-marks, thanks to its textured, grippy surface. Plus, a loop at one end offers the option to secure it to your bench.\u003c\/p\u003e\u003cp class=\"\" style=\"white-space:pre-wrap;\"\u003eCrafted from 304 stainless steel, our planing stop is laser-cut and precision-bent for durability and effectiveness. The teeth, cut at a 60° angle, are easily sharpened with a standard triangular file. The safe-stop cover, made from tough yet flexible nylon, is distinctly black to prevent accidental disposal.\u003c\/p\u003e\u003cp class=\"\" style=\"white-space:pre-wrap;\"\u003eElevate your woodworking with the No-Mod Planing Stop – the solution for fast, efficient, and safe stock preparation.\u003c\/p\u003e\u003cp class=\"\" style=\"white-space:pre-wrap;\"\u003eProudly made in the USA.\u003c\/p\u003e\u003cp class=\"\" style=\"white-space:pre-wrap;\"\u003ePatent Pending.\u003c\/p\u003e","brand":"Compass Rose Tools","offers":[{"title":"Default Title","offer_id":46993907024093,"sku":"CRMT-500-200","price":39.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0754\/4147\/1709\/files\/cr_9.webp?v=1763000627"},{"product_id":"no-mod-planing-stop-afbj7","title":"No-Mod Planing Stop--Left Handed","description":"\u003cp class=\"\" style=\"white-space: pre-wrap;\"\u003eTransform your hand-tool woodworking with the Compass Rose “No-Mod” Planing Stop. This innovative design seamlessly integrates with your woodworking vise, offering a hassle-free planing stop without any modifications to your workbench. Installation is a breeze - simply place it in your vise and tighten, taking less than 5 seconds (yes, we've timed it!). Removal is equally swift.\u003c\/p\u003e\n\u003cp class=\"\" style=\"white-space: pre-wrap;\"\u003eWhen not in use, the No-Mod Planing Stop conveniently hangs on a peg or screw via its included hang-hole. Perfect for storage on your bench leg or tool-wall, or even in your tool chest for on-the-go accessibility.\u003c\/p\u003e\n\u003cp class=\"\" style=\"white-space: pre-wrap;\"\u003eSafety and versatility are key. Our exclusive “safe-stop” cover slides over the teeth, safeguarding your hands and tools. This durable cover also allows for direct planing without leaving tooth-marks, thanks to its textured, grippy surface. Plus, a loop at one end offers the option to secure it to your bench.\u003c\/p\u003e\n\u003cp class=\"\" style=\"white-space: pre-wrap;\"\u003eCrafted from 304 stainless steel, our planing stop is laser-cut and precision-bent for durability and effectiveness. The teeth, cut at a 60° angle, are easily sharpened with a standard triangular file. The safe-stop cover, made from tough yet flexible nylon, is distinctly black to prevent accidental disposal.\u003c\/p\u003e\n\u003cp class=\"\" style=\"white-space: pre-wrap;\"\u003eElevate your woodworking with the No-Mod Planing Stop – the solution for fast, efficient, and safe stock preparation.\u003c\/p\u003e\n\u003cp class=\"\" style=\"white-space: pre-wrap;\"\u003e\u003cstrong\u003eThis left-handed version is a mirror image of the standard No-Mod Planing Stop. It is made for left-handed woodworkers who mount their vise to the \u003c\/strong\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eright side\u003c\/strong\u003e\u003c\/span\u003e\u003cstrong\u003e of the bench.\u003c\/strong\u003e \u003cstrong\u003eIf you mount your vise on the left, then you want our \u003c\/strong\u003e\u003ca href=\"https:\/\/www.compassrosetools.com\/store\/p\/no-mod-planing-stop\"\u003e\u003cstrong\u003estandard stop\u003c\/strong\u003e\u003c\/a\u003e\u003cstrong\u003e.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"\" style=\"white-space: pre-wrap;\"\u003eProudly made in the USA.\u003c\/p\u003e\n\u003cp class=\"\" style=\"white-space: pre-wrap;\"\u003ePatented.\u003c\/p\u003e","brand":"Compass Rose Tools","offers":[{"title":"Default Title","offer_id":46993907056861,"sku":"CRMT-500-300","price":39.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0754\/4147\/1709\/files\/1000022504.webp?v=1763000579"},{"product_id":"quick-high-knob-5-8","title":"Quick High Knob (#5-8)","description":"\u003cp style=\"white-space:pre-wrap;\" data-rte-preserve-empty=\"true\"\u003eFixing up vintage hand planes is pretty easy….unless the handles are broken or missing. The front knob is fairly simple to make, as long as you have a lathe and know how to use it. Instead of making a new knob, many folks end up buying vintage handles or spending money on new replacements.\u003c\/p\u003e\u003cp class=\"MsoNormal\" style=\"white-space:pre-wrap;\" data-rte-preserve-empty=\"true\"\u003eCompass Rose is making it easy to get that vintage plane up and running with our Quick High Knob. It’s a faithful replica of the classic Stanley high knob, but made from durable PETG plastic. This material is smooth to the touch and will never need finish. It’s resistant to heat, UV light, and solvents. Unlike a wooden knob, the Compass Rose Quick High Knob is very difficult to break under normal woodshop conditions.\u003c\/p\u003e\u003cp class=\"MsoNormal\" style=\"white-space:pre-wrap;\" data-rte-preserve-empty=\"true\"\u003eThe Quick  High Knob is 3D printed in our Cleveland Workshop. The knob has a very faint seam along one side. Most users don’t even notice it, but you can remove it with fine sandpaper.\u003c\/p\u003e\u003cp class=\"MsoNormal\" style=\"white-space:pre-wrap;\" data-rte-preserve-empty=\"true\"\u003eIf you also pick up our \u003ca href=\"\/store\/p\/quick-tote-5-8\"\u003eQuick Tote\u003c\/a\u003e, you’ll have that classic hand plane working in no time at a price you can afford.\u003c\/p\u003e\u003cp class=\"MsoNormal\" style=\"white-space:pre-wrap;\" data-rte-preserve-empty=\"true\"\u003e\u003cu\u003ePlease Note\u003c\/u\u003e: The Quick High Knob fits Stanley models 4 ½, 5, 5 ½, 6, 7 and 8, but \u003cu\u003enot\u003c\/u\u003e 5 ¼, which takes a #3 knob. The High Knob is found on planes made \u003cem\u003eafter\u003c\/em\u003e 1919 and fits most planes Type 12 and later. If you don’t know which knob you need, measure the mounting post. If the mounting post is 2 ½” (64mm) long, then it’s a high knob plane and you’re on the right page.\u003c\/p\u003e\u003cp class=\"MsoNormal\" style=\"white-space:pre-wrap;\" data-rte-preserve-empty=\"true\"\u003eIf your mounting post is 2”(51mm) long, then you need a “Low” Knob. Low Knobs will be available soon.\u003c\/p\u003e\u003cp class=\"MsoNormal\" style=\"white-space:pre-wrap;\" data-rte-preserve-empty=\"true\"\u003eThis knob will fit most metal planes other than Stanley, but we can’t guarantee it.\u003c\/p\u003e\u003cp class=\"MsoNormal\" style=\"white-space:pre-wrap;\" data-rte-preserve-empty=\"true\"\u003eWe do not currently offer Quick Handles for sizes smaller than #5, but we’re working on handles for the #4 and they should be available soon.\u003c\/p\u003e","brand":"Compass Rose Tools","offers":[{"title":"Default Title","offer_id":46993907122397,"sku":"CRCT-700-100","price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0754\/4147\/1709\/files\/20250423_145424.webp?v=1762997613"},{"product_id":"quick-tote-5-8","title":"Quick Tote (#5-8)","description":"\u003cp style=\"white-space:pre-wrap;\" data-rte-preserve-empty=\"true\"\u003eFixing up vintage hand planes is pretty easy….unless the handles are broken or missing completely. You can make your own handles, but the rear tote is a complex shape with a hole drilled at an angle. Even for skilled woodworkers, this part can be a challenge.\u003c\/p\u003e\u003cp class=\"MsoNormal\" style=\"white-space:pre-wrap;\" data-rte-preserve-empty=\"true\"\u003eUsed totes are available, but they aren’t cheap and they often need to be repaired or refinished. Of course, you can buy a brand-new tote, but these are generally expensive and might cost more than you paid for the plane!\u003c\/p\u003e\u003cp class=\"MsoNormal\" style=\"white-space:pre-wrap;\" data-rte-preserve-empty=\"true\"\u003eCompass Rose is making it easy to get that vintage plane up and running with our Quick Tote. It’s a faithful replica of the classic Stanley tote, but made from durable PETG plastic. This material is smooth to the touch and will never need finish. It’s resistant to heat, UV light, and solvents. Unlike a wooden tote, the Compass Rose Quick Tote is very difficult to break. Even the fragile “horn” on the back of the tote is unbreakable in normal woodshop use.\u003c\/p\u003e\u003cp class=\"MsoNormal\" style=\"white-space:pre-wrap;\" data-rte-preserve-empty=\"true\"\u003eThe Quick Tote is 3D printed in our Cleveland Workshop. The tote has a very faint seam along one side. Most users don’t even notice it, but you can remove it with fine sandpaper.\u003c\/p\u003e\u003cp class=\"MsoNormal\" style=\"white-space:pre-wrap;\" data-rte-preserve-empty=\"true\"\u003ePick up the Quick Tote and you’ll have that classic handplane working in no time at a price you can afford.\u003c\/p\u003e\u003cp class=\"MsoNormal\" style=\"white-space:pre-wrap;\" data-rte-preserve-empty=\"true\"\u003eQuick knobs also available \u003ca href=\"\/store\/p\/quick-high-knob-5-8\"\u003ehere\u003c\/a\u003e.\u003c\/p\u003e\u003cp class=\"MsoNormal\" style=\"white-space:pre-wrap;\" data-rte-preserve-empty=\"true\"\u003e\u003cu\u003ePlease note\u003c\/u\u003e: this model of Quick Tote fits Stanley models 4 ½, 5, 5 ½, 6, 7 and 8, but \u003cu\u003enot\u003c\/u\u003e 5 ¼, which takes a #3 tote. We do not currently offer Quick Handles for sizes smaller than #5, but we’re working on handles for the #4 and they should be available soon. The Quick Tote will fit Stanley planes from any era and should fit most equivalent planes made by companies like Miller’s Falls and Sargent.\u003c\/p\u003e","brand":"Compass Rose Tools","offers":[{"title":"Default Title","offer_id":46993907155165,"sku":"CRCT-700-101","price":12.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0754\/4147\/1709\/files\/20250423_144617.webp?v=1763000423"},{"product_id":"ready-set-planing-stop","title":"Ready-Set Planing Stop","description":"\u003cp class=\"\"\u003eThe toothed planing stop is the quickest way to prepare stock in a hand-tool shop. Faster and easier than a tail vise, the stop holds your work at a single point and leaves it free to be flipped or rotated. Most planing stops are driven into a post and mortised into the workbench; a big modification to your bench. \u003c\/p\u003e\u003cp class=\"\"\u003eOur planing stop attaches directly to the benchtop with three screws (included). In less than a minute, it transforms any flat surface into a workbench. The Compass Rose planing stop comes “ready-set” with the teeth 3\/8” (9.5mm) above the bench-top. Our stop will handle 1” (25mm), ¾” (19mm) and ½” (13mm) stock while keeping the teeth safely below your tools. (To plane thinner stock, just put a scrap under the wood.)\u003c\/p\u003e\u003cp class=\"\"\u003eThe Compass Rose Planing Stop comes with our exclusive “safe-stop” cover. The safe-stop slides over the teeth and protects your hands and tools when the stop is not in use. You can also plane directly against this cover any time you don’t want tooth-marks in your work. The cover is durable enough for hard use and it has a textured surface that will grip your work. We’ve also included a loop at one end of the stop so you can tie it to your bench with a piece of string.\u003c\/p\u003e\u003cp class=\"\"\u003eOur planing stop is laser-cut and precision-bent from 304 stainless steel. The teeth are cut at 60° and can be sharpened with a standard triangular file. The safe-stop cover is made from durable nylon so it’s both tough and flexible, and it’s black so you won’t throw it away by accident. The included screws are also stainless.\u003c\/p\u003e\u003cp class=\"\"\u003eMade in USA.\u003c\/p\u003e","brand":"Compass Rose Tools","offers":[{"title":"Default Title","offer_id":46993907187933,"sku":"CRMT-500-100","price":17.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0754\/4147\/1709\/files\/product_thumb_original.webp?v=1763000334"},{"product_id":"the-compass-rose-sawyers-hooks","title":"The Compass Rose Sawyer's Hooks","description":"\u003cp class=\"\" style=\"white-space: pre-wrap;\"\u003eAccurate crosscuts can be a challenge. Tenon shoulders and other small cuts are often done in the vise, with the work held at an awkward angle. Most of us adapt to sawing this way, but it’s not ideal.\u003c\/p\u003e\n\u003cp class=\"\" style=\"white-space: pre-wrap;\"\u003eFor centuries, woodworkers have performed crosscuts and other small jobs in a 'bench hook,' a clever wooden jig that hooks onto the edge of the workbench and holds the work flat while it's sawn or chiseled. Bench hooks are simple, and an experienced artisan can make a set from scraps. Unfortunately, bench hooks need to be flat and square to work well. Many beginners simply don’t have the skills to make good bench hooks, and commercial bench hooks are either expensive or poorly made.\u003c\/p\u003e\n\u003cp class=\"\" style=\"white-space: pre-wrap;\"\u003eCompass Rose Toolworks is solving this problem with our new \u003cstrong\u003eSawyer’s Hooks\u003c\/strong\u003e; an affordable DIY kit that lets you make your own bench hooks in about an hour. Our hooks are CNC machined from cabinet-grade birch plywood, so they’re straight and square. They also won’t cup or twist like solid wood can.\u003c\/p\u003e\n\u003cp class=\"\" style=\"white-space: pre-wrap;\"\u003eAssembly is fast and easy. Place dowels in the pre-drilled holes, add glue, clamp the parts together, and let everything dry. All the parts are clearly marked, and we’ve positioned the dowel holes so the Sawyer’s Hooks can only go together one way—the right way. Our free digital \u003ca href=\"https:\/\/www.compassrosetools.com\/s\/sawyers-hooks.pdf\"\u003eAssembly Guide\u003c\/a\u003e has clear instructions with plenty of pictures.\u003c\/p\u003e\n\u003cp class=\"\" style=\"white-space: pre-wrap;\"\u003eThe completed hooks have a recessed fence to guide your back-saw during delicate cuts. If you’d rather have a fence that goes all the way to the edge, just flip one hook over. In the flipped position, the hooks can be used for shooting the end-grain of your cuts. Your plane rides on your benchtop, and the hook’s integrated fence prevents blow-out. The Sawyer’s Hooks might even replace your dedicated shooting board.\u003c\/p\u003e\n\u003cp class=\"\" style=\"white-space: pre-wrap;\"\u003eMany bench hook designs use a single, wide hook for all jobs, but we’ve created a pair of narrower hooks. With two bench hooks, you can hold any length of wood. Place one hand on the work between the hooks and push forward to hold the wood in place while you work. You control the pressure, so you can instantly flip or rotate the workpiece. No need to undo a clamp or vise. If you’ve never worked this way, you might be surprised by the flexibility and solid grip of good bench hooks.\u003c\/p\u003e\n\u003cp class=\"\" style=\"white-space: pre-wrap;\"\u003eUse our hooks for a year or two (they’ll last much longer), and you’ll have the skills to make your own, and we bet you will. Once you get used to working with bench hooks, you won’t go back.\u003c\/p\u003e\n\u003cp class=\"\" style=\"white-space: pre-wrap;\"\u003eKit includes:\u003c\/p\u003e\n\u003cp class=\"\" style=\"white-space: pre-wrap;\"\u003e• 2 Base Boards \u003cbr\u003e• 4 Fences \u003cbr\u003e• 14 Dowels (2 extra, just in case.) \u003cbr\u003e• Download the \u003ca href=\"https:\/\/www.compassrosetools.com\/s\/sawyers-hooks.pdf\"\u003eAssembly Guide here\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp class=\"\" style=\"white-space: pre-wrap;\"\u003eMade in USA.\u003c\/p\u003e","brand":"Compass Rose Tools","offers":[{"title":"Default Title","offer_id":46993907286237,"sku":"CRCT-800-100","price":39.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0754\/4147\/1709\/files\/DSCF6849.webp?v=1763000048"},{"product_id":"vise-block","title":"The Compass Rose Vise Block","description":"\u003cp style=\"white-space:pre-wrap;\" data-rte-preserve-empty=\"true\"\u003eCutting joinery often means holding the wood with one side of the vise, leading to an uneven load. This causes many vises to \"rack,\" pushing the jaws out of parallel, compromising the grip, and straining the vise. Traditionally, a \"rack-stop\" — a stack of shims on a dowel — has been the only solution. Unfortunately, rack-stops are fiddly and inconvenient. They need to be reset for every thickness of stock, they fall out of the vise, and they’re easy to misplace.\u003c\/p\u003e\u003cp style=\"white-space:pre-wrap;\" data-rte-preserve-empty=\"true\"\u003eCompass Rose Toolworks has reimagined this tool with the \u003cstrong\u003eVise Block\u003c\/strong\u003e. Instead of the traditional stack-of-shims, our Vise Block is crafted from a single piece of high-strength plastic and its stair-step design is made for the hand tool shop.\u003c\/p\u003e\u003cp style=\"white-space:pre-wrap;\" data-rte-preserve-empty=\"true\"\u003e\u003cspan\u003eThe Vise Block is easy to use. Just close your vise until it almost touches your work, slide the Vise Block into place until it stops, and tighten the vise. That’s it.\u003c\/span\u003e\u003c\/p\u003e\u003cp style=\"white-space:pre-wrap;\" data-rte-preserve-empty=\"true\"\u003eIf you need to reset for a different stock thickness, slide the Vise Block out while you change pieces. The block has an integrated “shelf” that sits on the bench and won’t fall off. Place your new workpiece in the vise, slide the Vise Block over, and retighten. It automatically adjusts to the new stock—you don’t even need to know how thick it is. There’s nothing to measure or adjust. Ever.\u003c\/p\u003e\u003cp style=\"white-space:pre-wrap;\" data-rte-preserve-empty=\"true\"\u003e\u003cspan\u003eThe Compass Rose Vise Block has channels cast into it, so dust and shavings fall through and don’t collect on top. It has an integrated hang-hole, so you can hang it anywhere. It’s bright-white, so you won’t throw it away by accident, and it’s unbreakable under normal shop conditions. This design is so unique, we’ve patented it.\u003c\/span\u003e\u003c\/p\u003e\u003cp style=\"white-space:pre-wrap;\" data-rte-preserve-empty=\"true\"\u003eVise Blocks are 3D Printed in our Cleveland Workshop from PETG plastic on top-of-the-line Bambu printers. PETG is UV, temperature, and solvent resistant and won’t degrade over time. Our new manufacturing process guarantees greater precision and uniformity while virtually eliminating defects.\u003c\/p\u003e\u003cp style=\"white-space:pre-wrap;\" data-rte-preserve-empty=\"true\"\u003eDesigned to be compatible with both shop-made and commercial vises, the Compass Rose Vise Block ensures a steady grip and reduces strain on your vise. Try it and we’re sure you’ll never go back to a shop-made rack-stop. This one is so much better.\u003c\/p\u003e\u003cp style=\"white-space:pre-wrap;\" data-rte-preserve-empty=\"true\"\u003eMade in the USA.\u003c\/p\u003e\u003cp style=\"white-space:pre-wrap;\" data-rte-preserve-empty=\"true\"\u003ePatent Pending.\u003c\/p\u003e","brand":"Compass Rose Tools","offers":[{"title":"Default Title","offer_id":46993907319005,"sku":"CRCT-600-100","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0754\/4147\/1709\/files\/20241203_143551-2.webp?v=1762997523"},{"product_id":"vise-block-lefty","title":"The Compass Rose Vise Block LEFT-HANDED","description":"\u003cp style=\"white-space:pre-wrap;\" data-rte-preserve-empty=\"true\"\u003eCutting joinery often means holding the wood with one side of the vise, leading to an uneven load. This causes many vises to \"rack,\" pushing the jaws out of parallel, compromising the grip, and straining the vise. Traditionally, a \"rack-stop\" — a stack of shims on a dowel — has been the only solution. Unfortunately, rack-stops are fiddly and inconvenient. They need to be reset for every thickness of stock, they fall out of the vise, and they’re easy to misplace.\u003c\/p\u003e\u003cp style=\"white-space:pre-wrap;\" data-rte-preserve-empty=\"true\"\u003eCompass Rose Toolworks has reimagined this tool with the \u003cstrong\u003eVise Block\u003c\/strong\u003e. Instead of the traditional stack-of-shims, our Vise Block is crafted from a single piece of high-strength plastic and its stair-step design is made for the hand tool shop.\u003c\/p\u003e\u003cp style=\"white-space:pre-wrap;\" data-rte-preserve-empty=\"true\"\u003e\u003cspan\u003eThe Vise Block is easy to use. Just close your vise until it almost touches your work, slide the Vise Block into place until it stops, and tighten the vise. That’s it.\u003c\/span\u003e\u003c\/p\u003e\u003cp style=\"white-space:pre-wrap;\" data-rte-preserve-empty=\"true\"\u003eIf you need to reset for a different stock thickness, slide the Vise Block out while you change pieces. The block has an integrated “shelf” that sits on the bench and won’t fall off. Place your new workpiece in the vise, slide the Vise Block over, and retighten. It automatically adjusts to the new stock—you don’t even need to know how thick it is. There’s nothing to measure or adjust. Ever.\u003c\/p\u003e\u003cp style=\"white-space:pre-wrap;\" data-rte-preserve-empty=\"true\"\u003e\u003cspan\u003eThe Compass Rose Vise Block has channels cast into it, so dust and shavings fall through and don’t collect on top. It has an integrated hang-hole, so you can hang it anywhere. It’s bright-white, so you won’t throw it away by accident, and it’s unbreakable under normal shop conditions. This design is so unique, we’ve patented it.\u003c\/span\u003e\u003c\/p\u003e\u003cp style=\"white-space:pre-wrap;\" data-rte-preserve-empty=\"true\"\u003eVise Blocks are 3D Printed in our Cleveland Workshop from PETG plastic on top-of-the-line Bambu printers. PETG is UV, temperature, and solvent resistant and won’t degrade over time. Our new manufacturing process guarantees greater precision and uniformity while virtually eliminating defects.\u003c\/p\u003e\u003cp style=\"white-space:pre-wrap;\" data-rte-preserve-empty=\"true\"\u003eDesigned to be compatible with both shop-made and commercial vises, the Compass Rose Vise Block ensures a steady grip and reduces strain on your vise. Try it and we’re sure you’ll never go back to a shop-made rack-stop. This one is so much better.\u003c\/p\u003e\u003cp style=\"white-space:pre-wrap;\" data-rte-preserve-empty=\"true\"\u003e\u003cstrong\u003eThe LEFT HANDED Vise Block is a mirror-image of the original model. (It has a black triangle printed near the logo for easy identification.) This model is meant to be used on the \u003cu\u003eright side\u003c\/u\u003e of the vise. Generally, this suits left-handed woodworkers or anyone who mounts their face-vise on the right-hand end of the bench.\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"white-space:pre-wrap;\" data-rte-preserve-empty=\"true\"\u003eMade in the USA.\u003c\/p\u003e\u003cp style=\"white-space:pre-wrap;\" data-rte-preserve-empty=\"true\"\u003ePatent Pending.\u003c\/p\u003e","brand":"Compass Rose Tools","offers":[{"title":"Default Title","offer_id":46993907351773,"sku":"CRCT-700-200","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0754\/4147\/1709\/files\/20241203_144429-2.webp?v=1762999784"},{"product_id":"advanced-shooting-board-kit","title":"Advanced Shooting Board Kit","description":"\u003cp class=\"MsoNormal\"\u003eHand tool woodworkers need a shooting board to square up crosscuts, make precise parts, and slice end grain for a clean look. Experienced woodworkers can make a shooting board in an hour, but beginners often struggle to make their first shooting board square and accurate…and that’s the hard part. A shooting board that \u003ci\u003eisn’t\u003c\/i\u003e square is pretty useless.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAt Compass Rose, we know that woodworkers need a helping hand with this critical jig, so we invented the Advanced Shooting Board Kit. Our kit is made from 100% Baltic Birch plywood cut on industrial CNC mills for ultimate precision.\u003cspan style=\"mso-spacerun: yes;\"\u003e  \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThe weakest point of any shooting board is the fence. This critical part gets chewed up over time and it stops supporting the wood during shooting, leading to splintered corners and loss of accuracy. Our fence slides left-to-right, so you can always nudge it over and trim the end for a clean, gap-free fit between the fence and the plane. It’s like having a brand new shooting board every time you use it.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eMost shooting boards won’t hold long pieces and many woodworkers resort to making massive shooting boards that are heavy and difficult to store. Our shooting board features our exclusive \u003cb\u003estock support\u003c\/b\u003e, a detachable hook that slides over to fit boards of any length. With our Advanced Shooting Board, you can shoot boards even \u003ci\u003elonger\u003c\/i\u003e than your workbench with no additional jigs or supports. We’ve also included a robust cleat that hooks over the edge of your bench and a large hang-hole for easy storage. Even if your shop is tiny, our shooting board won’t get in the way.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eOur shooting board is compatible with all common metallic hand planes. We generally use a vintage Stanley No. 5, but larger and smaller planes work well too.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eWe know that many artisans want a shooting board that works with the Veritas\u003cspan style=\"mso-bidi-font-family: Calibri; mso-bidi-theme-font: minor-latin;\"\u003e™\u003c\/span\u003e Shooting Plane and Shooting Board Track, so we’ve made the Advanced Shooting Board compatible with these popular tools. The Shooting Board Track slides right onto our shooting board; you just need to make a tiny adjustment to our fence. You can also use the Veritas\u003cspan style=\"mso-bidi-font-family: Calibri; mso-bidi-theme-font: minor-latin;\"\u003e™ Shooting Plane on our shooting board without the track. We’ve done it and it works great. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bidi-font-family: Calibri; mso-bidi-theme-font: minor-latin;\"\u003eThe Advanced Shooting Board is a kit, so you build it. It’s an easy project that only takes a couple of hours. We’ve drilled the holes and cut the joints, so you’re mostly just gluing parts together. The Advanced Shooting Board comes will all the hardware you need, including dowel pins to align parts and a pair of Allen wrenches to tighten the fence-bolts. If you’d like to learn more about assembling our Shooting Board, check out the full \u003cu\u003eassembly video\u003c\/u\u003e or download the \u003ca title=\"Compass Rose Advanced Shooting Board Assembly Guide\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0754\/4147\/1709\/files\/Shooting_Board_Assembly_Guide.pdf?v=1763322140\"\u003e\u003cu\u003efree assembly guide\u003c\/u\u003e\u003c\/a\u003e. You can watch the whole build before you buy. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bidi-font-family: Calibri; mso-bidi-theme-font: minor-latin;\"\u003eThe Advanced Shooting Board is built to last, and it might be the only shooting board you ever need. And when you are ready to build your own, you can use our shooting board to make the parts. Buy the Compass Rose Advanced Shooting Board and you’ll be set up to make accurate, square components for years to come.\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cstrong\u003e\u003cspan style=\"mso-bidi-font-family: Calibri; mso-bidi-theme-font: minor-latin;\"\u003e*Please note, our shooting board is not available in a left-handed version and cannot be configured for left-handed use. We researched the left-handed version extensively and we cannot offer it at an affordable price. \u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bidi-font-family: Calibri; mso-bidi-theme-font: minor-latin;\"\u003eMade in USA. \u003cbr\u003e\u003cbr\u003eVeritas™ Shooting Plane and Shooting Board Track sold separately. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e","brand":"Compass Rose Tools","offers":[{"title":"Default Title","offer_id":47004945514717,"sku":"CRWT-810-100","price":99.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0754\/4147\/1709\/files\/20250915_151211.jpg?v=1763062365"},{"product_id":"razors-edge-plane-blade-4-5-2-straight","title":"Razor's Edge Plane Blade (4-5, 2\") STRAIGHT","description":"\u003cp class=\"MsoNormal\" align=\"center\" style=\"text-align: center;\"\u003e\u003cb\u003eRazor’s Edge Plane Blade (4-5; Straight)\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eIf you need a replacement blade for your handplane, you have a lot of choices. Most of the replacement blades on the market stay sharp for a long time, but some modern steels also take a long time to sharpen and often don’t work with traditional oil stones.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eLast year, we learned about AEB-L, a Swedish steel designed for use in disposable razors. AEB-L was designed to take a keen edge, have good edge retention, and be highly corrosion-resistant. We thought that these characteristics would also make a good plane blade, so we had some test blades made and the results were excellent!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThe Compass Rose Razor’s Edge Plane Blades sharpen quickly and take a very keen edge. You can also sharpen them on any standard sharpening media. In fact, our blades are very similar to popular O1 steel, but with two important differences: our blades hold an edge longer and they’re much more corrosion resistant. If you have a damp shop or if you work with green wood, that extra resistance to rust is a huge advantage.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eWe even sent our blades out for third-party testing by James Wright. He put them through the same rigorous tests he used for his own famous blade comparison tests. James found that our blades sharpened fast, got very sharp, and held an edge longer than 01 steel.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eOur blades measure 0.94\" and are slightly thicker than a vintage Stanley iron, so they drop right into most metal planes with no modification. You probably won’t need to widen the mouth on your plane and your original chipbreaker screw should work fine. Our blades are 2” (50mm) wide and will drop straight into No. 4 and No. 5 size planes. (Larger and smaller planes take different size irons.)\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThe Razor’s Edge blade also comes in a curved version to instantly transform your plane into a scrub or fore plane.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eTo read more about AEB-L, \u003ca href=\"https:\/\/knifesteelnerds.com\/2019\/03\/04\/all-about-aeb-l\/\" title=\"Knife Steel Nerds\"\u003echeck out this article.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eMade in USA.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e*Razor’s Edge Blades are made to fit No 4 and No 5 size planes from manufacturers like Stanley, Millers Falls and Sargent. They should fit any similar metallic plane with a 2” (50mm) blade. These blades are generally not suitable for wooden planes.\u003c\/p\u003e","brand":"Compass Rose Tools","offers":[{"title":"Default Title","offer_id":48113470046429,"sku":"CRDT-420-100","price":58.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0754\/4147\/1709\/files\/straight1.jpg?v=1784313045"},{"product_id":"razors-edge-plane-blade-4-5-2-curved","title":"Razor's Edge Plane Blade (4-5, 2\") CURVED","description":"\u003cp class=\"MsoNormal\" align=\"center\" style=\"text-align: center;\"\u003e\u003cb\u003eRazor’s Edge Plane Blade (4-5, 2\") CURVED\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eFor hand tool woodworking, it’s essential to have a “coarse” plane with a highly cambered (curved) edge. Historically, coarse planes were called “scrub” planes if they’re short and “fore” planes if they’re longer, like a jack plane. Scrub and fore planes allow you to take a heavy cut with minimal tearout. You can waste away material fast and quickly dimension rough stock.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eUnfortunately, making that curved iron can be a chore. You really need an electric grinder and new woodworkers can struggle with getting the right radius on the edge.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eCompass Rose wants to make it easy for you to get your coarse plane going fast, so we’ve created the \u003cb\u003efirst pre-radiused blade \u003c\/b\u003eon the market. Our Razor’s Edge Curved Blade is ready to drop in to your Stanley No. 4 or No. 5 plane, to instantly create a scrub or fore plane. Our blades come pre-radiused at 10\u003cspan style=\"mso-bidi-font-family: Calibri; mso-bidi-theme-font: minor-latin;\"\u003e°, an excellent curve for coarse work. The blade edge has been precision-milled to follow that curve, so the bevel is neatly formed and consistent. And our blades come sharp! You can give them a light honing, but they’ll cut right out of the package. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bidi-font-family: Calibri; mso-bidi-theme-font: minor-latin;\"\u003eVintage planes are highly variable, so you might need to move the frog or slightly widen the mouth of your plane to accommodate the radiused edge. This is normal and most coarse planes have a wide mouth to easily pass thicker shavings. Many times, less expensive planes have wider mouths and are perfect for conversion. I have my curved blade in a vintage Victor plane. This bargain model came with a wider mouth and the Razor’s Edge Curved Bade dropped in with no modification. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bidi-font-family: Calibri; mso-bidi-theme-font: minor-latin;\"\u003eThe Razor’s Edge Curved Blade is made from Swedish AEB-L steel, a corrosion-resistant alloy that sharpens quickly, takes a keen edge and has good edge-retention.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eTo read more about AEB-L, \u003ca href=\"https:\/\/knifesteelnerds.com\/2019\/03\/04\/all-about-aeb-l\/\" title=\"Knife Steel Nerds\"\u003echeck out this article.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eMade in USA.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e*Razor’s Edge Blades are made to fit No 4 and No 5 size planes from manufacturers like Stanley, Millers Falls and Sargent. They should fit any similar metallic plane with a 2” (50mm) blade. These blades are generally not suitable for wooden planes.\u003c\/p\u003e","brand":"Compass Rose Tools","offers":[{"title":"Default Title","offer_id":48113497964765,"sku":"CRDT-420-200","price":58.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0754\/4147\/1709\/files\/Curved1.jpg?v=1784312785"}],"url":"https:\/\/compassrosetools.com\/collections\/handwerks.oembed","provider":"Compass Rose Tools","version":"1.0","type":"link"}